What’s in the Box
- 1x Box Mod
- 1x Oil Atomizer
- 1x Wax Atomizer
- 1x Connector
- 1x Micro USB Cable
- 1x Loading Tool
- 1x Instruction Manual
How it Works
First, assure your Yocan Hive 2.0 is fully charged. To do that, charge via the USB charger provided into a power outlet or computer.
To fill the liquid concentrate atomizer: start by unscrewing the mouthpiece. Take a syringe and tilt at an angle along the side of the glass and squeeze out the oil (do not exceed 0.8mL).To load the solid concentrate atomizer: Begin by unscrewing the atomizer and tube. Use your loading tool to put a grain of rice sized amount on the quartz coil. Reattach the mouthpiece/atomizer tube by screwing it on when it is filled/loaded.
Click the power button five times in a quick succession to activate your device. Three blue lights will flash 3 times, this means the unit is on.
The output voltage is adjustable; simply press the power button three times rapidly to adjust the voltage level. One light showing blue means it’s low voltage, two lights showing blue means middle voltage, three lights showing blue means high voltage. When your device is middle voltage, press the power button three times to switch it to high voltage, then press the button three times again the voltage will turn to low voltage. When adjusted to your desired voltage level, hold the Hive 2.0’s power button and begin vaping.
If three blue lights flash 10 times at the same time, it means it is time to charge the battery.
When the Hive 2.0 is charging, three blue lights will flash in a loop. If the battery is charged to 35%, the first blue light will stay on while the other two lights keep flashing in a loop.
When the Hive 2.0 is charged to 70%, the first and second lights stay blue while the third light continues flashing. When it’s fully charged, all three blue lights will flash eight times at the same time, and is immediately followed by all of the lights extinguishing.
The Hive 2.0 supports 15 seconds of continuous heating. If you draw over 15 seconds at one time, the voltage indicator lights will flash eight times, then the vape function will be disabled at that time.
Keep your device clean to ensure optimum operation. Use isopropyl alcohol to clean any stubborn areas of buildup or residue. Replace the atomizers periodically; atomizers have a lifespan of roughly 6-8 weeks, depending on use.